| Course Title | Code | Semester | L+U Hour | Credits | ECTS |
|---|---|---|---|---|---|
| Computer-Aided Design -I | MAK2103 | 3. Semester | 3 + 1 | 4.0 | 4.0 |
| Prerequisites | None |
| Language of Instruction | Turkish |
| Course Level | Associate |
| Course Type | |
| Mode of delivery | Face to face, Application will be done in the computer lab. |
| Course Coordinator |
Lect. Ali ÖZCAN |
| Instructor(s) |
Ali ÖZCAN |
| Assistants | |
| Goals | In this course, computer-aided two-dimensional drawing is intended to gain proficiency. |
| Course Content | 1 - CAT software run-time options. 2 - Sliding menus and options. 3 - in the toolbar commands. 4 to open and close the toolbar. 5 - Setting the screen images and illustrations. 6 - Drawing helpful commands. 7 - Installation of line types, settings and color selection .8 - Layers of the creation, editing, adjustment and removal. 9 - .10 off CAT software - to make the drawing stages coordinate system to use. 11 - technical drawing using the drawing commands. 12 - adding text to drawings |
| Learning Outcomes |
- True, circle and arc drawing commands (LINE, CIRCLE, ARC, VIEWRES) by applying the plot. - Display commands (ZOOM, PAN, Redraw, Regen) uses - Partial deletion commands (BREAK, TRIM) makes using the application. - Mirror image and rotate commands (MIRROR, MIRRTEXT, ROTATE) uses drawings. - For scanning, use the HATCH command and the menu will make the necessary arrangements |
| Week | Topics | Learning Methods |
|---|---|---|
| 1. Week | 1 Basic technical drawing and design criteria. 2 The general characteristics of geometric drawing and design program. | Course Hours Other Activities Preparation, After Class Study |
| 2. Week | 2 Dimensional Drawings methods (coordinates) 1 Absolute (absolute coordinate method) 2-relative (relative) coordinates method | Other Activities Preparation, After Class Study Course Hours |
| 3. Week | 3 - Polar (angular) coordinates method 4 - Ortho method | Course Hours Other Activities Preparation, After Class Study |
| 4. Week | Coordinates method applications | Other Activities Preparation, After Class Study Course Hours |
| 5. Week | DRAW toolbar commands "circle" (circle) drawing methods and sample applications | Other Activities Preparation, After Class Study Course Hours |
| 6. Week | Trim, Extend, chamfer, fillet command in AutoCAD applications settings page (210 * 297) working with layers, line types Creating Layer creating specifications and varieties | Course Hours Other Activities Preparation, After Class Study |
| 7. Week | Scaling, and application commands and parameters | Course Hours Other Activities Preparation, After Class Study |
| 8. Week | Writing commands and parameters, and applications (multiline text) Copy, Mirror, Offset, Move, Rotate command applications. Two-dimensional geometrical drawing applications | Course Hours Other Activities Preparation, After Class Study |
| 9. Week | MID-TERM | Course Hours |
| 10. Week | Scanning (Hatch) with special attention settings, applications, 2-dimensional geometric drawing applications | Course Hours Preparation, After Class Study Other Activities |
| 11. Week | The Tools menu adjustments, two-dimensional geometrical drawing applications | Course Hours Other Activities Preparation, After Class Study |
| 12. Week | Setting Array command, 2D geometric drawing applications | Other Activities Preparation, After Class Study Course Hours |
| 13. Week | Stretch adjustments, two-dimensional geometrical drawing applications | Course Hours Other Activities Preparation, After Class Study |
| 14. Week | Output from the printer settings, two-dimensional geometrical drawing applications | Other Activities Preparation, After Class Study Course Hours |
| Lecture Notes |
| Program Requirements | Contribution Level | DK1 | DK2 | DK3 | DK4 | DK5 | Measurement Method |
|---|---|---|---|---|---|---|---|
| PY1 | 4 | 0 | 0 | 0 | 0 | 0 | - |
| PY2 | 1 | 0 | 0 | 0 | 0 | 0 | - |
| PY3 | 2 | 0 | 0 | 0 | 0 | 0 | - |
| PY4 | 4 | 0 | 0 | 0 | 0 | 0 | - |
| PY5 | 1 | 0 | 0 | 0 | 0 | 0 | - |
| PY6 | 1 | 0 | 0 | 0 | 0 | 0 | - |
| PY7 | 2 | 0 | 0 | 0 | 0 | 0 | - |
| PY8 | 2 | 0 | 0 | 0 | 0 | 0 | - |
| PY9 | 3 | 0 | 0 | 0 | 0 | 0 | - |
| PY10 | 2 | 0 | 0 | 0 | 0 | 0 | - |
| PY11 | 2 | 0 | 0 | 0 | 0 | 0 | - |
| PY12 | 3 | 0 | 0 | 0 | 0 | 0 | - |
| PY13 | 3 | 0 | 0 | 0 | 0 | 0 | - |
| 0 | 1 | 2 | 3 | 4 | 5 | |
|---|---|---|---|---|---|---|
| Course's Level of contribution | None | Very Low | Low | Fair | High | Very High |
| Method of assessment/evaluation | Written exam | Oral Exams | Assignment/Project | Laboratory work | Presentation/Seminar |
| Event | Quantity | Duration (Hour) | Total Workload (Hour) |
|---|---|---|---|
| Course Hours | 14 | 4 | 56 |
| Preparation, After Class Study | 13 | 1 | 13 |
| Midterm 1 | 1 | 2 | 2 |
| Final | 1 | 2 | 2 |
| Practice | 13 | 2 | 26 |
| Classroom Activities | 1 | 3 | 3 |
| Total Workload | 102 | ||
| ECTS Credit of the Course | 4.0 | ||
